|
Supplementary featuresAastra 630d 33eud-1095/1.0 – I7.8 – 07.2009■ Making a Conference CallYou are in a call and have a call party on hold at the same time. You want to include the party onhold in the conversation and hold a conference call.With the conference function you can include a call party on hold in the current conversation.From the conference call you can initiate an enquiry call to someone else. You can brokerbetween the parties of the conference and the enquiry call party.Depending on the system, a conference call can consist of up to 6 conference participants. Youcan hold a conference call with internal and external users.■ Connecting a caller throughYou want to put your call partner through to someone else.With the Enquiry call function you can connect your call partner with someone else. You canconnect internal and external users with one another.Conference Add a caller on hold:Press the Conference softkey.➔ The call party on hold is now included in the call.Note:Depending on the system’s configuration you may hear an attention tone.Leaving a conference call:Press the End key.➔ The other conference parties remain in the call.Enquiry You are making/taking a call:Press the Enquiry softkey. Enter the phone number of the enquiry call party.➔ Enquiry call party is called; 1st call partner is on hold.Note:You can also find the call number of the user you want in the phone book or ina call list.Connecting with notification:Wait until the person has answered the call. Announce the call party.Connect Press the Connect softkey or the End key.➔ 1.Your call partner and the other person are now connected with eachother.Note:If the other user does not answer, you can use the End call softkey to cancel theenquiry and take back the 1. call.Connecting without notification:Wait for the first ringing tone, then press the End key.➔ The other party is then called directly by your first call partner.Note:Recall: If the other party does not answer, the call comes back to your phone.
PreviousNext |