Aastra DT4X3 User Manual

Also see for DT4X3: User manual User guide User guid

Contents

Aastra DT4X3 User Manual Manual pdf 75 page image

1424-EN/LZT 103 089 A3 2012-02-23User ManualCordless Phones for MX-ONE™697 Select "Add new". A Put headset in Pairing mode dialog window is displayed.8 Press "OK". It will now search for a Bluetooth headset for connection.9 When headset is found, press "Pair".10 If needed, enter PIN code, see user manual for the Bluetooth headset. Press "OK".The dialog Successful pairing appears if the pairing process was successful. TheBluetooth headset will also be connected indicated by the icon in front of the headset.Tip: It is possible to configure the headset button with a specific function, such as post-dial, diallast called number, or dial a predefined number. See the handset’s Configuration Manual formore information.8.9.2 HeadsetIn order to achieve optimal audio quality with the different headset types, it is recommended toselect the corresponding headset type.The default setting is microphone on a boom, that is, the audio is optimized for using a headsetwith microphone on a boom. The headset type can be changed in the menu by doing as follows:1 Enter the menu by pressing "Menu".2 Select in the menu.3 Select "Headset".4 Select the corresponding headset type from list, that is, "Mic on boom", or "Hearingprotection". Additional headsets15 might be visible in the list.5 Press "Select".Tip: It is possible to configure the headset button with a specific function, such as post-dial, diallast called number, or dial a predefined number. See the handset’s Configuration Manual formore information.Note: When Bluetooth is disabled and having an active call in loudspeaker mode on anintrinsically safe handset, the audio will not be transferred to the headset when connecting it.IMPORTANT: The headset Microphone on a boom is not available as accessory for theintrinsically classified handset. If used, it is NOT permitted to use the headset in hazardousareas.8.9.3 SystemThe handset can subscribe up to eight different systems.Change SystemSelect “Automatic” or a specific system. If the handset is set to “Automatic”, it selects a systemaccording to the priority list, see Priority on page 70.Subscribe SystemTo subscribe a system, the “Park:” (Portable Access Right Key) and “Ac:” (Authenticationcode) related to the system are needed. Contact the system administrator for more information.Note: The PARK code may not be needed if there is no alien DECT system within the coveragearea.1 Enter the menu by pressing "Menu".15.Only visible if a headset profile has been configured in the PDM.