Aastra 6757i CT User Manual

Also see for 6757i CT RP: Administrator's guide Release note Release note Administrator's guide Specifications

Contents

Aastra 6757i CT User Manual Manual pdf 224 page image

Available Features Enabled by Administrators216 41-001384-00 Rev 01 – 06.2013• Pressing the Options Menu for redirection from the server does not interfere with normal operations of the phone (forexample, pressing the options menu when on a call does not affect the call).• If the phone is locked, you must unlock the phone before accessing the Options Menu redirect feature. After pressingthe Options Key, the phone displays a screen that allows you to unlock the phone before continuing.• On the 6757i CT, the redirection feature works after selecting the Services Menu. To display the original Options Menu,press and hold the Options key.Contact your System Administrator for more information about this feature.XML Applications and Off-Hook InteractionIf enabled by your Administrator, the 6757i CT can be prevented from going into the off-hook/dialing state when thehandset is off-hook and the call ends. This feature is disabled by default and must be enabled by your Administrator. Thedisabled behavior is as follows:You are in a call using the handset and the phone displays an XML application. The far-end terminates the call, and a newXML application gets pushed/pulled onto the display. Since the handset is off-hook and in idle mode, the "offhook idletimer" starts. When this timer expires, the phone applies dial tone and moves to the off-hook/dialing state, which thendestroys the XML application that was being displayed.Contact your System Administrator for more information about this feature.XML Override for a Locked PhoneThe 6757i CT has a feature that allows a locked phone to be overridden when an XML application is sent to the phone.This feature also allows you to still use softkeys/expansion module keys applicable to the XML application even thoughthe phone is locked. However, any keys NOT associated with the XML application cannot be used when the phone islocked.Also, XML Get Requests override the locked feature on the phone so that any softkey pressed by the user that initiates aGet Request, continues to get sent.Only a System Administrator can configure the feature of "XML override for a locked phone:":RTP Recording and Simultaneous PlayingThe IP Phones now allow for Real-Time Transport Protocol (RTP) recording and simultaneous playing of an audio file viaXML commands created by your Administrator. The RTP and multicast RTP commands allow the phone to send/receivean RTP stream to/from given multicast/unicast addresses (without involving SIP signalling).Contact your System Administrator for more information about this feature.“Hold” Feature Enhancement (for Broadsoft Servers)The Hold feature allows you to put an active call on “hold,” then retrieve the call later. This enhancement is intended for IPphones operating with servers that support RFC3264 (for example, Broadsoft). If a server does not support RFC3264,then the IP phones do not use RFC3264 functionality.Notes:1. When an RTP stream is being sent with RTP recording and simultaneous playing (mix), the IP Phone LCD displays anicon with an ‘m’ on top to indicate that a mixed RTP stream is being sent.2. When RTP stream is being received with RTP recording and simultaneous playing (mix), you can use the volume con-trols on the IP phone to adjust the volume (increase or decrease) to your specifications.