72 AastraLink RP Phone User GuideUsing Your 6757i CT RP Cordless Handset Handset Icons and Status MessagesScreen IconsStatus MessagesHandset KeysSoftkeys ( {or })Your 6757i CT RP cordless handset has 2 softkeys directly under the LCD display. The softkey menus will changedepending on the phone’s state, displaying relevant softkeys only. These softkeys are pre-programmed for the call handlingand extension management features.Talk /Hold vKeyThe Talk/Hold key v is a multi-purpose key with the following uses:• To initiate a call by seizing the line or through pre-dial.• To answer a call during ringing.• To place a call on hold during an active call.Hold vKeyPressing the hold key v while on a call will place the call on hold. While a call is on hold, and if there are no other activecalls, the LED will flash at the hold rate and the display will present the Call is on hold prompt. In addition, held callreminder tone will be played in the form of a short ring burst (flash ring).bBattery Charge State4 bars for battery full and the battery icon flashes whenchargingmReception (Radio Link)On - Within Range: Ready for useOFF - Out of range/no radio linkhFeature Key ActivationIndicates the phone is off hook or a call is in progresspSilent AlerterSilent alerter activated¬bRinger VolumeThis icon is available only when the phone is in idle mode toindicate the ringer volume level. The box will go from empty tofully black to represent from off to low to high volume.lbReceiver VolumeThis icon is available only when the phone goes off-hook toindicate the receiver audio volume. The box will go fromempty to fully black to represent from low to high volume;there are 10 volume levels total.Directory ListThis icon located just above the softkey allows access to theDirectory List feature.¨Callers ListThis icon located just above the softkey allows access to theCallers List feature.DisplayMessage DescriptionMicrophonemuteIndicates when the Mute button has been ActivatedOut of range Appears briefly when pressing a key if out of range ofthe base station