A&D UA-855 Instruction Manual

Also see for UA-855: Specification

Contents

A&D UA-855 Instruction Manual Manual pdf 8 page image

English 7Using The MonitorAdjusting The Built-in ClockAdjust the clock prior to use as necessary.1. Press and hold the Clock button until the year starts blinking.2. Select the year using the button.Press the Clock button to set the current year andmove to month/day selection. The date can beset anywhere between the years 2006 and 2056.3. Select the month using the button.Press the Clock button to set the current monthand move to day selection.4. Select the day using the button.Press the Clock button to set the current day andmove to hour/minute selection.5. Select the hour using the button.Press the Clock button to set the current hour andmove to minute selection.6. Select the minute using the button.(Press the Clock button to go to the temperatureunit selection mode. For details, refer to page 5.)Press the START button to set the current minuteand activate the clock.Setting Three RemindersThis monitor has 3 reminder alarms. You can set3 different reminder alarms within a 24-hour period.1. Press and hold the Clock button until the yearstarts blinking. Then press the Graph button.“P-1” is shown at the bottom line of the display.2. Select the hour using the button and press theClock button to set the hour and move to minuteselection. Press the button to set the minute andpress the Clock button to return to the clock display.The mark appears on the display.3. To set the second and third reminders, press thegraph button in the reminder setting mode todisplay “P-2” or “P-3”. Repeat the above processto set each reminder.Press andholdAnytimeYearMonthDayHourMinuteClock Select the unitof temperaturePressand holdFirstbuzzerThirdbuzzerSecondbuzzerAnytime