A&D UA-853 Instruction Manual

Also see for UA-853: Specification Instruction manual

Contents

A&D UA-853 Instruction Manual Manual pdf 6 page image

English 5Operation Mode1. Normal Measurement With Storing Data (Refer to page 9)Press the START button. Blood pressure is measured and data is storedwithin the device. The device can store the last ninety sets of data inmemory.2. Recalling The Data (Refer to pages 11 and 12)Press the MEMORY button to recall the data.The average data of all the previousmeasurements and the number of data aredisplayed, as indicated in the figure at theright.Further key operation will recall the averagedata during the AM, the average data duringthe PM and data of each measurement.For details on recalling data, refer to“Recalling Memory Data” on pages 11 and12.The device can store the last ninety sets ofdata in memory.3. Clearing The Data (Refer to page 11)Press and hold the MEMORY button until the “ ”(memory) mark blinks to clear the stored data.4. Measurement With The Desired Systolic PressureRefer to page 10 for the measurement with the desired systolic pressure.Average ofall the dataAveraged systolicAveraged diastolicNumber of dataPress the MEMORY buttonM