A&D UA-851 Instruction Manual

Also see for UA-851: Specification

Contents

A&D UA-851 Instruction Manual Manual pdf 11 page image

English 10MeasurementsMeasurement With The Desired Systolic PressureIf your systolic pressure is expected to exceed 230 mmHg, use thisprocedure.1. Place the cuff on the arm (preferably the left arm).2. Press and hold the START button.Release the button when the averageof all the data in memory is displayed.Press and hold the START buttonagain until a number about 30 to 40mmHg higher than your expectedsystolic pressure appears.3. Release the START button to startmeasurement, when the desirednumber is reached. Then continue tomeasure your blood pressure asdescribed on the previous page.Notes For Proper MeasurementSit down in a comfortable position. Placethe arm to be used for the measurementon a table or other support so that thecenter of the cuff will be at the sameheight as your heart.Relax for about five or ten minutes before taking a measurement. If youare excited or depressed by emotional stress, the measurement willreflect this stress as a higher (or lower) than normal blood pressurereading and the pulse reading will usually be faster than normal.An individual's blood pressure varies constantly, depending on what youare doing and what you have eaten. What you drink can have a verystrong and rapid effect on your blood pressure.This device bases its measurements on the heartbeat. If you have a veryweak or irregular heartbeat, the device may have difficulty determiningyour blood pressure.Should the device detect a condition that is abnormal, it will stop themeasurement and display an error symbol. Refer to page 4 for thedescription of the symbols.This blood pressure monitor is intended for use by adults only. Consultwith your physician before using this device on a child. A child should notuse this device unattended.Refer to the previous pagefor measurementPress and hold the buttonAt heart levelRelease the buttonat the desiredsystolic pressureSTARTSTARTPress and hold the buttonRelease the buttonwhen the averageis displayed.Starts inflation