A&D FX-200i Instruction Manual

Also see for FX-i Series: Instruction manual Quick start guide Quick start guide

Contents

A&D FX-200i Instruction Manual Manual pdf 49 page image

4710-9 Clock and Calendar Function (Only for FZ-i series)The FZ-i series balance is equipped with a clock and calendar function. When the “GLP output(info)” parameter is set to “1” or “2” and the “Time/Date output (5-td)” parameter is set to “1”, “2” or“3”, the time and date are added to the output data. Set or confirm the time and date as follows:Operation1 Press and hold the SAMPLE key until ba5fnc ofthe function table is displayed.2 Press the SAMPLE key several times to displayCl adj .3 Press the PRINT key. The balance enters the mode toconfirm or set the time and date.Confirming the date4 The current date is displayed with all the digitsblinking.z When the date is correct and the operation is to befinished, press the CAL key and go to step 8.z When the date is correct and the time is to beconfirmed, press the SAMPLE key and go to step 6.z When the date is not correct and is to be changed,press the RE-ZERO key and go to step 5.NoteThe year is expressed using a two-digit format. Forexample, the year 2010 is expressed as “10”.Setting the date (with part of the digits blinking)5 Set the date using the following keys.SAMPLE key To select the digits to changethe value. The selected digitsblink.RE-ZERO key To increase the value by one.MODE key To decrease the value by one.PRINT key To store the new setting,display end and go to step6.CAL key To cancel the new setting andgo to step 6.ConfirmTo the timesetting modeTo the timesetting mode