A&D AD-1672 Instruction Manual

AD-1672 Tabletop Breeze Break Instruction Manual1. Features The tabletop breeze break protects the balance from breezes, due to air conditioning and body motion, therebyreducing balance weighing error. The transparent panel assembly consists of antistatic plastic material which protects the balance from staticelectricity. Two guides, in the back panel, can be used to pass the RS-232C and AC adapter cables through. It is easy to move panels assembled to the tabletop breeze break.2. Specifications Mass: 10kg Size: 680 (Width) x 600 (Depth) x 720 (Height) mm Materials: Transparent Panel: Antistatic vinyl chlorideFrame: AluminumBack panelLeft side panelRight side panelFront beam panelCeiling panel Parts:3. UnpackingNote:The front beam panel and the back panel are packed using two joints of hooks and the square holes.Slide up and remove the front beam panel from the back panel .4. Assembling the Tabletop Breeze BreakStep 1. Place the back panel , with the condition of the label on the top and the square holes on thefront face, on the weighing table.Step 2. Assemble the left side panel andthe back panel using two jointsof hooks and the square holes.Step 5. Place the top panel on.Caution Do not use organic solvents to clean the tabletop breeze break as that may damage the transparency andantistatic properties of the panels. Use a soft lint free cloth dampened with warm water and a mild detergent, when cleaning the tabletop breeze break. Do not modify the tabletop breeze break. Consider to keep connections of parts when moving the tabletop breeze break.Step 4. Assemble the front beam panel in the sameway as steps 2 and 3.Cable guide3-23-14 Higashi-Ikebukuro, Toshima-ku, Tokyo 170-0013 JAPANTelephone: [81] (3) 5391-6132 Fax: [81] (3) 5391-6148LabelInsert and slide the hook ofthe left side panel intothe square hole of the backpanel .Adjust the height of both panels.Label LabelSetting exampleAccessory ( Sold separately )Vibration removal board( AD-1670 )Front beam panelCable guideRight side panelCeiling panelBack panelLeft side panelCable guide25 (Width) x 10 (Height) mmBack panelSquare holeSquare holeCable guideFront beam panelHookHookCeiling panelLeft and Right side panelHookSquare holeFixing tape (10 pcs )Note:Fix the eight corners of thetabletop breeze break with thefixing tape after assembling.Label Fixing tapeStep 3. Assemble the right side panelin the same way as step 2.Front beam panelBack panelHookSquare holeLabelSquare holeSquare hole

/ 1

Related manuals for A&D AD-1672