Menu
A&B Home D69517 Assembly Instruction Manual
   |
Assembly Instructions TheZen Bowl Fountain is packed in two separatecartons. Cartons are identified as 1/2 and 2/2.Cartons must be unpacked and contents removed.1A. Open Carton 1/2 and carefully remove all items,which include one bowl, one braided hose, and a completePump Kit.1B. Open Carton 2/2 and carefully remove content,which includes a pedestal and an inner container.(The inner container holds the water for the fountain).Position the inner container in the fountain’s desiredlocation. Then, carefully lift the outer pedestal andset it over the inner container Make sure the hatchfaces the power source.ZEN BOWL Outdoor Fountain #D69517 by A&B Home Inc.NOTE : Your new fountain has been designed for easy assembly. It should take a team of two less thanone hour to complete the process. Assemble the fountain in its desired permanent location.Note Lay Carton 2/2 on its side for easy content removal.Locate and prepare the Access Hatch.The pedestal has a small access hatch on one side.With the hatch facing the power source, removehatch cover with provided screwdriver, and setaside. (Screwdriver is shipped with the pump kit).Note Red valve and short side of braided hose must bepositioned as shown in photo.Insert long end of braided hose through hatch,and then through hole in top pedestal.Instruction pg. 1 of 3Note Because the electrical cord and plug will comeout through the notch at the bottom, the hatch must facethe power source.Place and prepare the Braided Hose. |
Related manuals for A&B Home D69517
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved