Aaeon UP Squared 6000 Edge Computing Kit Quick Start Manual

Also see for UP Squared 6000 Edge Computing Kit: User manual

Aaeon UP Squared 6000 Edge Computing Kit Quick Start Manual Manual pdf 1 page image

1. Connect Ethernetcable 2. Connect Monitor 3. Connect yourUSB devices 4. Connect PowerQuick Start GuideUP Squared 6000 Edge Computing KitUp to 1.7x improvement in single-thread performanceand up to 2x performance for 3D graphics comparedwith previous generation Intel processors.I/O interfaces include 1x USB 3.2 Type-C (OTG support), 2x USB 3.2 Type-A, 1x Micro USB (debug port),2x COM ports, 2x SATA 3.0, 1x full sized Mini-Card slot (via USB 2.0),1x M.2 2230 E key, 1x M.2 2280 M key, 1x M.2 3052 B key with micro-SIM card slot,1x HDMI 2.0b, 1x DP 1.2, Audio jack line I/O, 1x 40-pin HAT PSE header, 1x 40-pin HAT header, 4x GbEWHAT 'S IN YOUR KIT ?1x UP Squared 6000 systemUbuntu 20.04Intel® Edge Insights for Vision software package1x 12V6A (72W) Power Supply1x US power cord1x EU power cordYou will need to have the following:A monitor with HDMI or DP, and respective cables.USB keyboard and mouse.Ethernet cable or WiFi module (optional, to be installed manually).UP AI Core XM 2280 M.2 module (optional for UPN-EDGE-EHLX-4RE-A10-0864-FDK, to be installed manually).* UPN-EDGE-EHLX4RE-A10-FDKAI comes with XM 2280 installed (2x Intel® Movidius™ Myriad™ X)The UP Squared 6000 Edge Computing Kit comeswith passive cooling, RTC battery, onboard RAMand eMMC.The system comes with Ubuntu 20.04 Desktopincluding the Intel® Edge Insights for Visionsoftware package.Please follow these steps carefully before connectingcables and powering ON the system.GET READY CONNECT HARDWAREusername: devkitpassword: devkit- If proxy settings are required, you can set them from:System Settings > Network > Network Proxy4. Get Started with Intel® Edge Insights for Visionhttps://www.intel.com/content/www/us/en/developer/articles/training/devkit-gsg21.htmlCaution: This is a high performance system and may get hot during operation.SETUP DETAILS1. Connect the monitor with the system powered down.2. Power up the system. The system will turn on automatically and boot into the OS.3. Log in to the Ubuntu 20.04 OS with the following credentials:

/ 2

Related manuals for Aaeon UP Squared 6000 Edge Computing Kit