Aaeon SBC-656 Manual

Also see for SBC-656: User manual

Contents

Aaeon SBC-656 Manual Manual pdf 24 page image

Chapter 2 Installation 15CPU installing and upgradingYou can upgrade to a more powerful Celeron CPU at any time.Simply remove the old CPU, install the new one, and set thejumpers for the new CPU speed.Warning! Always disconnect the power cord from yourchassis when you are working on it. Do notmake connections while the power is on assensitive electronic components can be dam-aged by the sudden rush of power. Only experi-enced electronics personnel should open thesystem chassis.Caution! Always ground yourself to remove any staticcharge before touching the system board.Modern electronic devices are very sensitive tostatic electric charges. Use a grounding wriststrap at all times. Place all electronic componentson a static-dissipative surface or in a static-shielded bag when they are not in the chassis.Install a CPU in the ZIF socketSBC-656 Series provides a Zero Insertion Force (ZIP) socket foreasy CPU installation.1. Make sure the ZIF socket lever is in the upright position. Toraise the lever, pull it out to the side a little and raise it as far asit will go.2. Place the CPU in the empty socket. Follow the instructions thatcame wth the CPU. If you have no instructions, do the follow-ing: Carefully align the CPU so it is parallel to the socket andthe notch on the corner of the CPU corresponds with the notchon the inside of the socket. Gently slide the CPU in. It shouldinsert easily. If it doesn't, pull the lever up a little more.