AGB Guardian DT1 500 L Operator's Manual

Contents

AGB Guardian DT1 500 L Operator's Manual Manual pdf 14 page image

OperationRevision: Feb 2018134.2 MACHINE BREAK-IN4.3 FIELD USEAlthough there are no operational restrictions on the DT1 when used for the first time, it is recommendedthat the following mechanical items be checked:After using 1 to 5 hours1. Check all nuts, bolts and other fasteners. Tighten to their specified torque level.2. Check that the fuel lines and connections are in good condition and there are no leaks.3. Check that the electrical system is in good condition. Be sure all terminals and connectors are cleanand fully engaged.4. Go to the regular service schedule as defined in Section 5 (Retest and Inspection Form)Pre-Operation checklistEfficient and safe operation of the DT1 requires that each operator reads and understands the usageprocedures and all related safety precautions outlined in the section. A pre-operation checklist is providedfor the operator. It is important for both the personal safety and maintaining the good mechanical conditionof the DT1 that this checklist is followed.Before using the DT1 and each time there-after, the following areas should be checked off:1. Check that the DT1 is bolted or anchored to the transporting vehicle.2. Disconnect and secure all the lines and hoses before transporting.3. Close and tighten filler cap when tank is full.4. Turn pump off and disconnect or remove power lines.5. Check the tank gaps Clean if there is any debris, trash or diesel fuel.6. Check that all the required documentation and placards are with the unit and in good condition.NOTE: SEE reference Installation guide for DT1 EquipmentThe DT1 is designed to efficiently and effectively transfer,transport and refuel equipment in any location. It meetsand exceeds all Canadian and U.S. DOT fuel transportingrequirements and the UN certification. The IBC’s are built toU.S Standard Code of Federal Regulations CFR DOT part 49section 178.274.Each owner and user of the DT1 tank should reviewthis manual as part of the regular training and reviewprocedures.1. Owner/Operator Responsibility :It is the responsibility of each owner, operator or user to be familiar with all regulations that apply tothe equipment for transporting, filling, transferring and refueling equipment. Perform all tests per theregulations and maintain the appropriate records and paperwork. Always carry the required paperwork forthe Transport of Dangerous Goods. Be sure everyone is properly trained and licensed to use or transport theDT1.

/ 25

This manual is suitable for:

Guardian DT1 1000 L Guardian DT1 2000 L Guardian DT1 3000 L Guardian DT1 4000 L Guardian DT1 500 L Guardian DT1 5000 L

AGB Guardian DT1 500 L Operator's Manual

Product

Learn More

Legal