AGA SIX-FOUR SERIES - DC6 Owner's Manual

Also see for SIX-FOUR DC6 FFD: User's guide & installation instructions Manual

AGA SIX-FOUR SERIES - DC6 Owner's Manual Manual pdf 6 page image

FITTING AND PRODUCT DIMENSIONS6Fig. 1 DESN 512388 CAny side wall above the cooker on either side shall be not less than 60mm horizontally from thecooker (Fig. 1).Surfaces over the top of the cooker must not be closer than 650mm.A minimum clearance of 1000mm must be available at the front of the cooker to enable it to beserviced.The vent slots in the back of the top plate must not be obstructed.The cooker must stand on a firm and level surface we recommend that any soft material such aslinoleum is removed.PLEASE NOTE WHEN FITTING A COOKER HOODIf a cooker hood is to be fitted, we only recommend the 6-4 Series CH900 cooker hood. It mustbe installed at a height of at least 800mm above the hotplate.