DC/AC MicroProbe Models K100 and K110 194.6 Residual Readings Following Severe OverloadsLarge short-circuit and transient currents outside the operating rangeof the Model K100/K110 may cause large residual readings. In extremecases, the Model K100/K110 will not zero. If this happens:• Remove the probe from the test conductor.• Open the probe and release, allowing the jaws to snap back.Repeat this step several times.• Rezero the instrument before making successive measurements.www.ShopAEMC.comShop for AEMC products online at: 1.877.766.5412