AEMC CA876 User Manual

Also see for CA876: User manual

Contents

AEMC CA876 User Manual Manual pdf 7 page image

Infrared K-Thermometer Model CA876 52.2 Button Functions2.2.1 Center (Yellow) Button - MEASPress this button to turn the thermometer ON and perform a measure-ment. When the button is released, the meter will automatically HOLD(freeze) the last reading on the display for approximately 15 to 20 secondsbefore automatically shuting OFF.2.2.2 Mode ButtonPressing this button makes the thermometer enter and advance thoughseveral functions including some programmable functions. The MODEbutton is used to select a specific function (e.g. MIN, MAX) or to adjust anAlarm or the emissivity.To enter the mode program, press MODE once. SET is displayed in lowerright hand corner.When pressed consecutively, it will scroll through the following settings:ε → ε (Set) → ALM Hi (Set) → ALM Lo (Set) → MAX → MIN→ K→ εSET is displayed in the lower right hand corner of the display when aselected function is programmable (ε, ALM Hi, ALM Lo).ε: Emissivity may be adjusted with the  and  buttons to match a particu-lar target. We recommend leaving it at 0.95 for general use.ALM Hi: The Hi alarm set point is adjusted using the  and  buttons. Whenthis set point is reached the beeper will sound and ALM HI will be displayed.ALM Lo: The Lo alarm set point is adjusted using the  and  buttons.When this set point is reached the beeper will sound and ALM Lo will bedisplayed.MAX: The Max value measured will be displayed during measurement. Whilein the MAX mode and when measuring, the MODE button will toggle the mea-surement between MAX – MIN – Present reading – MAX.MIN: The Min value measured will be displayed during measurement. Whilein the MIN mode and when measuring, the MODE button will toggle the mea-surement between MIN – Present reading – MAX – MIN.K: The lower display will indicate the reading from the K-type thermocouple.NOTE: If the thermometer is OFF, pressing the “MEAS” button for more than4 seconds will set the thermometer in the MIN/MAX record mode when pow-ered up.www. .com information@itm.com1.800.561.8187