Menu
AEM 30-5500 Quick Start Manual
Also see for 30-5500: ManualQuick start guide
              | |
13monitoring live data, note the voltage value when the throttle is completely closed and also when completely open.Assign the closed throttle voltage to 0 and the full open throttle voltage to 100.Data LoggingIf using logging version of CD dash, logging can be configured by going to Setup>Logging to open the Logging Setupwindow. Here, channels can be selected to be logged and at what capture rate. Logging a specific channel alsoautomatically selects all other children and parent channels for logging at the same rate.The log can be started in one of three ways:· Single input start/stop - When the specified input is non zero, the log will be started. When zero, the log will bestopped. For example, if the channel EngineSpeed is used as the trigger, the logger will log anytime the engine isrunning.· Twin start/stop triggers - When the Start trigger is non zero, the log will be started. When the Stop trigger is nonzero, the log will be stopped.· Log Always - The logging starts logging immediately on power on and will log until switched off or until the log isfull.To download log files from the CD dash, launch AEMdata, power the dash on and connect the comms cable tobulkhead cable USB port. A Logger Detected message will be shown once the AEMdata software connects with thedash. In the message, click on Download Data, select the files to be saved and click Ok. Select a save location,name the file and click on Save. |
Related manuals for AEM 30-5500
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved