8. INSTALLATIONWARNING!Read the "Safety Information"carefully for your safety and cor-rect operation of the appliancebefore installing the appliance.8.1 PositioningThis appliance can be installed in a dry,well ventilated indoor, also in a garageor cellar, but for optimum performanceinstall this appliance at a location wherethe ambient temperature corresponds tothe climate class indicated on the ratingplate of the appliance:Cli-mateclassAmbient temperatureSN +10°C to + 32°CN +16°C to + 32°CST +16°C to + 38°CT +16°C to + 43°C8.2 Electrical ConnectionCAUTION!Any electrical work required toinstall this appliance should becarried out by a qualified electri-cian or competent person.WARNING!This appliance must be earthed.The manufacturer declines any li-ability should these safety meas-ures not be observed.A BCDEThe wires in the mains lead arecoloured in accordance with thefollowing code:A Green and Yellow: EarthC Brown: LiveE Blue: NeutralAs the colours of the wires in the mainslead of this appliance may not corre-spond with the coloured markings iden-tifying the terminals in your plug, pro-ceed as follows:1. Connect the wire coloured greenand yellow to the terminal markedeither with the letter “E“ or by theearth symbol or coloured greenand yellow.2. Connect the wire coloured blue tothe terminal either marked with theletter “N“ or coloured black.3. Connect the wire coloured brown tothe terminal either marked with the“L“ or coloured red.4. Check that no cut, or stray strands ofwire is present and the cord clamp Dis secure over the outer sheath.5. Make sure the electricity supply volt-age is the same as that indicated onthe appliance rating plate.6. Switch on the appliance.The appliance is supplied with a 13 ampplug fitted B. In the event of having tochange the fuse in the plug supplied, a12 www.aeg.com