AEG S51700TSX0 User Manual

Contents

AEG S51700TSX0 User Manual Manual pdf 16 page image

12. Remove and install the handle 4) on theopposite side.13. Reposition, level the appliance, wait forat least four hours and then connect itto the power socket.Do a final check to make sure that:• All screws are tightened.• The door opens and closes correctly.If the ambient temperature is cold (i.e. inWinter), the gasket may not fit perfectly tothe cabinet. In that case, wait for the natu-ral fitting of the gasket.In case you do not want to carry out the above mentioned operations, contact the near-est After Sales Service Force. The After Sales Service specialist will carry out the reversibil-ity of the doors at your cost.Plug socketCAUTION!Make sure that the mains cable can move freely.The plug socket necessary for connection of yourappliance to the electricity supply should be posi-tioned so that it is possible to pull out the appli-ance plug.If your appliance is installed under a continuousworktop, the plug socket should be provided asshown.Electrical ConnectionCAUTION!Any electrical work required to install this appliance should be carried out by a qualifiedelectrician or competent person.WARNING!This appliance must be earthed.The manufacturer declines any liability should these safety measures not be observed.4) If foreseen16 Installation