8.1 The salt containerCAUTION!Only use salt specificallydesigned for dishwashers.The salt is used to recharge the resin inthe water softener and to assure goodwashing results in the daily use.How to fill the salt container1. Turn the cap of the salt containercounterclockwise and remove it.2. Put 1 litre of water in the saltcontainer (Only for the first time).3. Fill the salt container with dishwashersalt.4. Remove the salt around the openingof the salt container.5. Turn the cap of the salt containerclockwise to close the salt container.CAUTION!Water and salt can come outof the salt container whenyou fill it. After you fill thesalt container, immediatelystart a programme toprevent corrosion.8.2 How to fill the rinse aiddispenserA BCCAUTION!Only use rinse aidspecifically designed fordishwashers.1. Open the lid (C).2. Fill the dispenser (B) until the rinseaid reaches the marking ''MAX''.3. Remove the spilled rinse aid with anabsorbent cloth to prevent too muchfoam.4. Close the lid. Make sure that the lidlocks into position.Fill the rinse aid dispenserwhen the indicator (A)becomes clear.If you use multi-tablets andthe drying performance issatisfactory, the rinse aidrefill indication can bedisabled.We recommend to alwaysuse rinse aid for betterdrying performance, also incombination with multi-tablets containing rinsingagent.9. DAILY USE1. Open the water tap.2. Press the on/off button to activatethe appliance.Make sure that the appliance is inprogramme selection mode.www.aeg.com34