Activate or deactivate the multitab function before the start of a washing program.You cannot activate or deactivate the multitab function when the program operates. Cancelthe washing program, then set the program again.To activate the multitab function:• Press the multitab button. The multitab indicator light comes on.To deactivate the multitab function:• Press the multitab button. The multitab indicator light goes off.Follow these steps if the drying results are not satisfactory:1. Fill the rinse aid dispenser with rinse aid.2. Activate the rinse aid dispenser.3. Set the rinse aid dosage to position 2.• You can only activate or deactivate the rinse aid dispenser when the multitab functionis activated.To activate/deactivate the rinse aid dispenser:1. Switch on the appliance.2. Make sure that the appliance is in setting mode.3. Press and hold function buttons B and C.– The indicator lights for function buttons A, B, and C start to flash.4. Press function button B.– The indicator lights for function buttons A and C go off.– The indicator light for function button B continues to flash.– The digital display shows the setting.Rinse aid dispenser deactivatedRinse aid dispenser activated5. Press function button B again.– The digital display shows the new setting.6. Switch off the appliance to save the operation.To use normal detergent again:1. Deactivate the multitab function.2. Fill the salt container and rinse aid dispenser.3. Adjust the water hardness setting to the highest level.4. Do a washing program without dishes.5. Adjust the water softener to the water hardness in your area.6. Adjust the rinse aid dosage.Select and start a washing programSet the options before the start of a washing program. When a washing program starts nooptions can be set. If it is necessary to set an option, cancel the operating washing program.18 Select and start a washing program