• Make sure that cutlery and dishes donot bond together. Mix spoons withother cutlery.• Make sure that glasses do not touchother glasses.• Put small items in the cutlery basket.• Put light items in the upper basket.Make sure that the items do notmove.• Make sure that the spray arm canmove freely before you start aprogramme.10.5 Before starting aprogrammeMake sure that:• The filters are clean and correctlyinstalled.• The cap of the salt container is tight.• The spray arms are not clogged.• There is dishwasher salt and rinse aid(unless you use multi- tablets).• The position of the items in thebaskets is correct.• The programme is applicable for thetype of load and for the degree ofsoil.• The correct quantity of detergent isused.10.6 Unloading the baskets1. Let the tableware cool down beforeyou remove it from the appliance.Hot items can be easily damaged.2. First remove items from the lowerbasket, then from the upper basket.At the end of theprogramme water can stillremain on the sides and onthe door of the appliance.11. CARE AND CLEANINGWARNING!Before maintenance,deactivate the appliance anddisconnect the mains plugfrom the main socket.Dirty filters and cloggedspray arms decrease thewashing results. Make acheck regularly and, ifnecessary, clean them.11.1 Cleaning the filtersThe filter system is made of 3 parts.CBA1. Turn the filter (B) counterclockwiseand remove it.ENGLISH 15