AEG BE4003001 User Manual

Also see for BE4003001: User manual User manual User manual User manual

Contents

AEG BE4003001 User Manual Manual pdf 25 page image

5. Put the door with the outer sidedown on a soft cloth on a stable sur-face. This is to prevent scratches.2B16. Hold the door trim (B) on the topedge of the door at the two sidesand push inwards to release the clipseal.7. Pull the door trim to the front to re-move it.8. Hold the door glass panels on theirtop edge one by one and pull themup out of the guide.9. Clean the glass panel with waterand soap. Dry the glass panel care-fully.Installing the door and theglass panelsWhen the cleaning is completed, installthe glass panels and the oven door. Dothe above steps in the opposite se-quence. Install the smaller panel first,then the larger.11. WHAT TO DO IF…WARNING!Refer to the Safety chapters.Problem Possible cause RemedyThe appliance does notheat up.The appliance is deacti-vated.Activate the appliance.The appliance does notheat up.The clock is not set. Set the clock.The appliance does notheat up.The necessary settingsare not set.Control the settings.The appliance does notheat up.The fuse is released. Make sure that the fuseis the cause of the mal-function. If the fuse re-leases again and again,contact a qualified elec-trician.The lamp does not oper-ate.The lamp is defective. Replace the lamp.ENGLISH 25

/ 28

Related manuals for AEG BE4003001