Installation Instructions48Installation Instructions1 Attention: The new appliance may only be installed and connected by a regis-tered expert.Please comply with this. If you do not, any damage resulting is not covered bythe warranty.1 Safety information for the installer• The electrical installation is to be set up so that the appliance can be isolatedfrom the mains with a minimum 3mm all-pole contact separation.Suitable separation devices include e.g. cut-outs, fuses (screw fuses are to betaken out of the holder), RCD’s and contactors.• Anti-shock protection must be provided by the installation.• The built-in unit must meet the stability requirements of DIN 68930.• Built-in ovens and built-in cooking surfaces are fitted with special connectionsystems. For safety reasons, they must only be combined with appliances fromthe same manufacturer.