48Instructions for the InstallerThe instructions given below aredesigned specifically for a qualifiedinstaller and should aid him or her toperform all installation, adjustment,and maintenance operations withabsolute precision and in compliancewith all current legislation andregulations. We strongly recommendthat all operations for the installationof your cooker be carryed out byQualified Personnel in accordance withexisting rules and regulations.Electrical connectionPrior to making the electrical connection, makesure that:— the protection fuse and the domesticwiring system are suitable to carry the totalelectric load of the oven (see rating plate);— your domestic wiring system has anefficient earth connection in compliance withrules and laws in force;— the wall socket or the omnipole switchused for the electrical connection can easilybe reached after the oven is built in.Electrical RequirementsAny permanent electrical installation mustcomply with the latest I.E.E. Regulations andlocal Electricity Board regulations. For yourown safety this should be undertaken by aqualified electrician, e.g. your local ElectricityBoard, or a contractor who is on the roll of theNational Inspection Council for ElectricalInstallation Contracting (NICEIC).The oven is designed to be connected to 230V (50 Hz) electricity supply.The oven has an easily accessible terminalblock which is marked as follows:Letter L - Live terminalLetter N - Neutral terminalor E - Earth terminalTHIS OVEN MUST BE EARTHEDThe cable used to connect the oven to theelectrical supply must comply to thespecifications given below.For Uk use onlyConnection Min. size Cable Fusevia Cable/flex /flextype• 13 A socket 2.5 mm2 3 core 13 A min.outlet butyl• 13 A insulatedspur box• Oven 2.5 mm2 PVC/PVC 15 A min.Control twin and 20 A max.Circuit earthMin. size Cable / flex type FuseCable/flex1.5 mm2 H07 RN-F, H05 RN-F, 13 AH05 RR-F, H05 VV-F,H05 V2V2-F (T90),H05 BB-FFor Europe use only