ADTRAN T1-FT1 User Manual

Contents

ADTRAN T1-FT1 User Manual Manual pdf 43 page image

Chapter 3. Operation61200060L1-1 TSU User Manual 3-7The opening menu is the access point to all other operations.There are four main menu items, 1)STATUS, 2)CONFIGURE,3)UTILITY, 4)TEST. Each main menu item has severalfunctions and submenus to identify and access specificparameters. In the discussions that follow, each main menucontains a complete menu diagram to identify the location ofeach operation.The Four Opening Menu FunctionsSTATUSThe Status menu provides the ability to view the status of theTSU operation. This menu includes the following sub-items.NI PERF RPTSUsed to view the user’s set of data on the Network InterfacePerformance Reports in compliance with ANSI T1.403 andAT&T Document TR54016.CURR ERR/ALMUsed to view current errors/alarms which are being reportedby the TSU.ERR/ALM HISTUsed to view and clear history errors and alarms.CONFIGThe Configuration menu is used to set the TSU's operationalconfiguration. This menu includes the following sub-items.NETWORK (NI)Used to set all of the parameters associated with the networkinterface.UNITUsed to control TSU’s control port baud rate and to setup thedial out function.PORTUsed to configure the parameters associated with the V.35port.