ADTRAN NetVanta 1230 Series Hardware Installation Manual

Also see for NetVanta 1234: Quick reference guide Specifications Hardware installation guide

Contents

ADTRAN NetVanta 1230 Series Hardware Installation Manual Manual pdf 25 page image

NetVanta 1230 Series Hardware Installation Guide Unit Installation61700594G1-34B Copyright © 2009 ADTRAN, Inc. 25Figure 9. Wallmount InstallationSupplying Power to the UnitThe NetVanta 1230 Series units come equipped with an auto-sensing 100 to 240 VAC, 50/60 Hz power supplyfor connecting to a properly grounded power receptacle. (A detachable power cable with a grounded,three-prong plug comes with the shipment.) To power these units, plug one end of the power cable into thepower connector of the NetVanta and the other end to an appropriate AC power source.After the NetVanta is powered on, the LED indicators will flash momentarily. This flashing represents a reset ofthe system.Use only approved power cable(s). If you have not been provided with a power cable foryour system, purchase a power cable that is approved for use in your country. The powercable must be rated for the product and for the voltage and current marked on theproduct's electrical ratings label. The voltage and current rating of the cable should begreater than the ratings marked on the product.To help prevent electric shock, plug the system and peripheral power cables intoproperly grounded electrical outlets. These cables are equipped with three-prongplugs to help ensure proper grounding. Do not use adapter plugs or remove thegrounding prong from a cable. If you must use an extension cable, use a 3-wire cablewith properly grounded plugs.CONSOLE100-250 VAC50-60Hz