ADTRAN NETVANTA 3100 SERIES Quick Start Manual

Also see for NetVanta 3100 Series: Quick start guide Quick start Quick start guide Quick start guide Quick start

ADTRAN NETVANTA 3100 SERIES Quick Start Manual Manual pdf 1 page image

Quick Start Guide, 61700600L2-13D, November 2009 1NET VANTA 3100 S ERIES ROUTERWITH D IAL BACKUP UNITP/N 1700600L2, 1700610L2GETTING STARTEDTwo configuration methods are available for your NetVanta router:• Web-based graphical user interface (GUI)• AOS command line interface (CLI)The GUI lets you configure the main unit settings, and provides online guidance, explanations foreach setting, and configuration wizards to help you get started. However, using the AOS CLI maybe necessary for more advanced configurations.ACCESS THE GUIYou may access the GUI from any Web browser on your network by following these steps:1. Connect the router to your PC, using an Ethernet cable connected to one of the four ports onthe back of the unit (Ethernet 1, 2, 3, or 4).2. Connect the router to your service provider connection, using the provided cable connectedto the ETH 0/1 port on the router (for the NetVanta 3120). If you have a NetVanta 3130, plugyour ADSL line into the port labeled ADSL on the back of the unit.3. After the router is connected to the PC, make sure the router is powered. Remember to plugthe unit in and to turn the unit on using the toggle switch at the rear of the unit.4. During bootup, your PC will obtain an IP address from the NetVanta 3100 Series unit’sDHCP server. By default, both the DHCP and HTTP servers are enabled.5. Enter the unit’s IP address in your browser address line. The default IP address is10.10.10.1.6. You will then be prompted for the user name and password (the default settings are adminand password).7. The initial GUI screen appears. You can access initial setup information by selecting SetupWizard from the menu on the left.For security purposes, you should set up an admin passwordimmediately. Use the Passwords menu of the GUI to change thispassword.By default, the NetVanta 3130 comes with an ADSL and anasynchronous transfer mode (ATM) port already configured andenabled. The service provider should provide a PVC (VPI/VCI) number,which will be used to configure the ATM PVC.e.

/ 4

Related manuals for ADTRAN NetVanta 3100 Series