ADTRAN IP 706 Administrator's Manual

Also see for IP 706: Release notes Quick reference guide Quick reference manual User guide Release notes

Contents

ADTRAN IP 706 Administrator's Manual Manual pdf 58 page image

Appendix A. Configuration and Line Parameters ADTRAN IP 700 Series Phone Administrator Guide58 Copyright © 2011 ADTRAN, Inc. 6AOSAG0001-31ABootName ASCIIStringIndicates the name of the boot image inthe phone. The file name can contain up to24 characters. The combination of filename and path can contain up to 32characters. A new name is specified in aconfiguration file and is checked againstthe version in flash to decide if a newversion needs to be downloaded.Config FileButton.z.Label ASCII Assigns the button label to the button atlocation z. This label has priority over alabel defined Reg.x.Label for line-typebuttons. The string (or UTF-8) must be 15characters or less.Config FileWeb InterfaceButton.z.Line 0 to 11 Assigns the value of x in Reg.x.* to theline key at location z.Z can be 1 to 6 on the IP 706 phone and 1to 12 on the IP 712 phone.Config FileWeb InterfaceButton.z.Realm Internal,External,PBX,OtherAssigns a call appearance type to a DSSor speed dial key. It is used to select thefacility type to originate calls. Other maybe used for post-call setup dialing strings.Config FileWeb InterfaceButton.z.Type DND,LineAssigns the type to the line key at locationz. At least one key must be configured asa Line to make or receive calls.Config FileWeb InterfaceCallerIdPopup True orFalseGlobally disables the incoming call pop-upwindow. This may be overridden by adifferent setting assigned inReg.x.CallerIdPopup.Default: TrueConfig FilePhone InterfaceWeb InterfaceCIDDisplayWithNumber True orFalseEnables (true) the display of the number ofan incoming call along with the name.Disabling (false) this feature causes onlythe name of the incoming call to bedisplayed.Default: TrueConfig FileWeb InterfaceCountry Up to 3ASCIICharacters1 to 255Specifies the country that is used by theInclude parameter to identify a particularfile.Default: 1DHCPConfig FilePhone InterfaceTable 12. Configuration Parameters (Continued)Parameter Value Type Description Sources