ADTRAN ATLAS 550 Quick Start Manual

Also see for ATLAS 550: Product manual User manual Specifications System manual Quick start guide

ADTRAN ATLAS 550 Quick Start Manual Manual pdf 1 page image

ATLAS 550 (DC SYSTEM) P/N 1200550L1For more detailed documentation, visit us online at www.adtran.comQuick Start GuideQuick Start Guide, 61200550L1-13A, August 2002 Technical Support 1-888-4ADTRAN (1-888-423-8726) Copyright  2002 ADTRAN, All Rights ReservedConnecting to the ATLAS 550Connecting a VT100 terminal (or VT100 terminal emulator) to the C RAFTinterface (on the front panel of the unit) or the C ONTROL I N interface (on the rearpanel of the unit) allows access to the terminal menus and managementfeatures of the ATLAS 550.Perform Steps Below in the Order Listed:1. Configure a VT100 terminal (or terminal emulation software) with thefollowing settings:If the terminal has a parallel setting, disable it and use serial.2. Connect one end of the 6” data cable (supplied) into the ATLAS 550 C RAFTor C ONTROL IN port. (This connection is RJ-45.) Make the connection to theVT100 terminal as appropriate for your connection. ADTRAN supplies anRJ-45 to DB-9 adapter for connections to standard DB-9 Communications(COM) ports.3. Initiate a terminal session and the LOGIN screen displays. The defaultpassword is password. (Passwords in the ATLAS 550 are case sensitive.)Data Rate: 9600 baud Stop Bits: 1Data Bits: 8 Flow Control: NoneParity Bits: NoneOKTESTERRORALARM1OKTESTERRORALARM2STATUSONLINETEST1 2 3 4NETWORKMODULESPOWERACOCRAFTETHERNETREMOTESYSTEMATLAS 550Network Module LEDs Option Module LEDsCraft InterfaceACO SwitchController LEDsCraft PinoutSystem Status LEDsThe System Status LEDs display the status of the power supply, controller, andother system parameters for the ATLAS 550. For a more detailed discussion ofthe front panel LEDs, refer to Section 2, Engineering Guidelines, of the ATLAS550 System Manual.PIN NAME DESCRIPTION1 GND Ground - connected to unit chassis2 RTS Request to send - flow control3 RXDATA Data received by the ATLAS 5504 DTR Data terminal ready5 TXDATA Data transmitted by the ATLAS 5506 CD Carrier detect7 UNUSED —8 CTS Clear to send - flow controlLED DescriptionPower Indicates the status of the power supplySystem Indicates the status of the unit controller and other system parameters.Ethernet Indicates the status of the ethernet port.Remote Indicates whether a user (Telnet or VT100) is logged in to the unit.Reviewing the Front Panel

/ 2

Related manuals for ADTRAN ATLAS 550