ADTRAN 600 Series Interface Manual

Contents

ADTRAN 600 Series Interface Manual Manual pdf 44 page image

Total Access 600 Series User Manual © 2002, ADTRAN, Inc.Total Access 600 Series SHDSL IAD User Interface Guide/64200683L1-31BPage 44LAN-TO-WAN (Out)The packets which come out toward the WAN from the TA600 can be filtered in three ways:Out ExceptionsThis is a list of up to 32 filter entries. The setup is exactly the same as the ! - 1 list.Configuring the Router – StatusUse the menu to view and set the parameters shown in Figure 13. The screens give the user useful information for debugging the current routes in the Total Access 600.Figure 13. Router/Status MenuFILTER LIST NAME Selects between filters defined in the list.NEXT OPER The next operation to use to combine with the nextfilter in the list:the last filter to combination. logically AND this filter with the next filter in thelist. logically OR this filter with the next filter in the list.DISABLED (*%6 Turns off packet input filtering. No outgoing packetsare blocked.BLOCK ALL All outgoing packets to the WAN are blocked except asdefined in the F ILTERS/OUT EXCEPTIONS list.F ORWARD ALL All outgoing packets to the WAN are not blocked ex-cept as defined in the FILTERS/O UT EXCEPTIONS list.