ADTRAN 1200312L5 User Manual

Contents

ADTRAN 1200312L5 User Manual Manual pdf 17 page image

Chapter 3. Operation61200312L1-1 VCOM Module User Manual 3-3MENU ACCESSThe ATLAS 550 system controller automatically detects the presence of theVCOM Module as it is installed into the system. To access the VCOMMODULE menus and submenus, use the keyboard arrow keys to scroll to theappropriate row and column; then, press Enter on the keyboard.M ODULES The following paragraphs describe the MODULES menus of the ATLAS 550.S LT Read Security: 5Displays the number of available slots in the ATLAS 550 chassis. SLOT 0refers to the ATLAS 550 Base Unit.TYPE Write Security: 3; Read Security: 5Displays the module type currently installed in the slot or the module typeyou plan to install in the slot. If a VCO MModule is installed, the TYPE fieldautomatically defaults to VCOM (the VCOM Module). Alternatively, youcan use this field to preconfigure the system before installing a module byspecifying the module type that will be installed into each slot.MENU Read Security: 5Displays additional status and configuration menus and submenus for var-ious modules. To access the VCOM Module (VCOM), use the arrow keys toscroll over to the MENU column and down to VCOM; then press Enter. (Adiscussion of the submenu items for this option begins with VCOM Menuson page 3-5.)ALARM Read Security: 5Indicates any alarm conditions on the VCOM Module. Press Enter in thisfield to open the A LARM menu.TEST Read Security: 5Indicates when the VCOM Module is executing a test. Press Enter in thisfield to open the TEST menu.Refer to the ATLAS 550 User Manual for detailed instructions onnavigating through the terminal menus.If a module is installed, TYPE automatically displays the name ofthe installed module. To change this name, set TYPE to E MPTY andthen select another module.