ADT FOCUS CADET User Manual

Also see for FOCUS CADET: User guide

Contents

ADT FOCUS CADET User Manual Manual pdf 70 page image

– 70 –System TestTo ensure proper operation of your FOCUS CADET security system, it isrecommended that you periodically test all devices within your system. Youcan print, display, or audibly annunciate all system tests. Before testingprotection groups and/or points, turn off the group(s) containing the points tobe tested.Burglary Protection Points (Audible)1. Using the operating panel’s numeric keypad, enter a valid ID code todisplay Action Menu 1.2. Bypass all protection points to be tested.3. Press More to display Action Menu 2.4. Press Test to display Test Menu 1.5. Press More to display Test Menu 2.6. Press Burg pts. audibly to audibly annunciate the test from the operatingpanel and begin the system test. The display will indicate "Test inProgress."7. Walk through the test areas and activate each protection point to betested. You will hear a beep when all points are secure (normal) and asteady tone when a point is activated.8. When the test is complete, return to the operating panel and re-enteryour ID code to display Action Menu 1.9. Press Reset to display the reset options.10. Press Tests to exit the test mode and to return the system to normaloperation.11. Press Continue to display Action Menu 1.12. Unbypass those points that were bypassed for test purposes.