ADT FOCUS CADET User Manual

Also see for FOCUS CADET: User guide

Contents

ADT FOCUS CADET User Manual Manual pdf 41 page image

– 41 –System Programming (cont’d)Assigning a User ID CodeThe ID code is used to access the operating panel. The first two digits of theID code are the user number. The number to be entered is the unique four-digit PIN. Choose a number that is easy to remember, but is still difficult forothers to guess.13. Press Change to display the ID Code Entry screen.Note: If this user number has an existing ID code, the existing four-digitPIN will not be displayed.14. Using the operating panel’s numeric keypad, enter the four-digit userPIN. Each digit is displayed as entered.15. Press Enter to enter the new user ID code into the system.16. Press Continue to assign this user a card/key code (go to step 18 below).17. Press Quit to return to Action Menu 4.Assigning a User a Card/Key Code18. Go to the nearest card/key reader and swipe the card through the readeror insert and remove the key. The red lamp on the reader will flash andthe key or card number will be displayed.19. Press Continue if a cancel date is desired, and continue with step 21.20. Press Quit to return to the User Selection Menu.Assigning a Code and Card Cancel DateA date valid for up to one year can be assigned to a user, after which theuser’s ID code and card/key code will be automatically deleted from thesystem. Use this feature only for temporary help or construction personnelwho will not need access after a job is completed.21. Using the operating panel’s numeric keypad, enter the month (1-12) andday (1-31) that this user will be automatically deleted from the system.22. Press Enter to enter the new user ID code cancel date into the system.23. Press Quit to return to the User Selection Menu.