ADRF Duo-i6525 User Manual

Also see for Duo-i6525: Quick start guide

Contents

ADRF Duo-i6525 User Manual Manual pdf 14 page image

Duo-i6525 RF RepeaterUser Manual V1.0Host ModeThis mode should be selected only if a Duo-i6525 is used alone without beingconnected to a collocated Sprint Nextel CDMA repeater functioning as a host.Remote ModeThis mode should be selected if a Sprint Nextel CDMA repeater is beinginstalled along with aDuo-i6525 and the ethernet port is being used forcommunicating with the CDMA repeater. In this case, a Duo-i6525 works as aremote sending its information to the collocated Host CDMA repeater.2.5. Installation2.5.1. ToolsNo special tools or equipments are needed in installing the Duo-i6525.2.5.2. ProcedureFour mounting holes are provided on the wall-mounting bracket to attach it tothe wall. The wall bracket must be securely attached to sufficiently carry theweight of the Duo-i6525, which is bolted to the wall bracket through fouraligned mounting holes.The following steps should be followed while mounting the repeater:Installation Procedure① Take the Duo-i6525 out of the box② Detach the mounting bracket from the Duo-i6525 by unscrewing the 8screws on the bracket. ( 4 on each side)③ Using the four guard screws, mount the bracket on the wall④ Make sure the bracket is securely mounted⑤ Slightly tilt the repeater and mount the repeater onto the wall as shown inthe picture. Hook the upper 2 guard screws first and then slide/push in thelower 2 guard screws into the place.⑥ Make sure the repeater is securely placed onto the wall bracket⑦ Fasten the 8 bracket screws back properly⑧ Inspect everything is secureAdvanced RF Technologies, Inc. Proprietary Document Page 14 of 31