27P.D.I. (Pre-Delivery Inspection) (For ATV-300) 1. Record the frame and engine number into the owner’s manual. 2. Check that all tires have correct pressure specified on the tireor in the owner’s manual. 3. Engine oil ( 4 stroke, 10W/40 or Grade SAE40 ) is enough 4. Battery is installed properly. 5. All brake are adjusted properly. 6. Fuel tank has enough gasoline to operate. 7. Check the suspension and drive chain for proper setup. 8. Check that all electrical components and lights are workingproperly. 9. Make sure that the owner’s manual and tool bag are installed in the tool box.