ADLINK Technology PCI-7200 User Manual

Also see for cPCI-7200: User guide User guide

ADLINK Technology PCI-7200 User Manual Manual pdf 15 page image

6 •• Installation2.2 UnpackingYour PCI-7200 card contains sensitive electronic components thatcan be easily damaged by static electricity.The card should be done on a grounded anti-static mat. Theoperator should be wearing an anti-static wristband, grounded atthe same point as the anti-static mat.Inspect the card module carton for obvious damage. Shipping andhandling may cause damage to your module. Be sure there are noshipping and handling damages on the module before processing.After opening the card module carton, extract the system moduleand place it only on a grounded anti-static surface component sideup.Again inspect the module for damage. Press down on all thesocketed IC's to make sure that they are properly seated. Do thisonly with the module place on a firm flat surface.Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEENDAMAGED.You are now ready to install your PCI-7200.2.3 Device Driver Installation for Windows 95While you first plug PCI-7200 card and enter Windows 95, thesystem will detect this device automatically and show the followingdialog box that prompts you to select the device informationsource.