Power Consumption 55MXC-6000Appendix A: Power ConsumptionA.1 Power Consumption ReferencePower consumption as follows is based on lab data in which 24VDC is applied and current is measured by the DC power supply.The power consumption (W) is calculated as the product ofapplied voltage (V) and the current (A).Platforms tested for this data have available external I/O inter-faces, and are attached to supported devices such as VGA/DVI/LVDS monitor, CF card, PS2 keyboard/mouse, USB dummy load(5VDC 500mA), external SATA , COM loopback, and audio loop-back, and an internal hard disk driver is installed.No internal PCI/PCIe/mini PCIe slots are occupied.Information is presented for reference only. Actual power con-sumption will vary with different attached devices and platformoperations.Table A-1: Power ConsumptionNOTE:NOTE:Information in this Appendix is for power budget planning anddesign purposes only. Actual power consumption may differbased on final application.Power Off System Idle System FullLoadRecommendedPower SupplyConsumption 0.72 W 41.28 W 78.72 W 100WNotes Inshutdownstatus withDC input,only PS2keyboard/mouse areconnectedUnderWindows XPdesktopwithoutexecutinganyapplicationprogramUnderWindows XPwith 100%CPUutilizationandaccessing allI/O devicessimultaneouslyAdditional powersupply is required ifadd-on cards areinstalled
