ACTi KCM-7911 Hardware User Manual

Also see for KCM-7911: Hardware manual Installation guide Installation guide

Contents

ACTi KCM-7911 Hardware User Manual Manual pdf 14 page image

www.acti.comKCM-7911 Hardware User’s Manual14How to Do the Waterproof InstallationThe following installation procedure makes the camera be water-resistant even for thesituations where the camera can easily be flooded by pouring rain.The important part to focus on during the installation:The protection of the cabling has to be done by a proper flex conduit.The size of the flex conduit that matches with the conduit gland is is3/8” (trade size) (Not included in the package).Have the Ethernet cable inserted through the flex conduittogether with RJ-45 connector. You may also consider to dothe RJ-45 connector crimping after pushing the cablethrough the conduit.Disassemble the conduit gland.Slide the clamping nut around flex conduit some 10-20 cmaway from the top. Fit the sealing insert (made of rubber)to the top of the flex conduit.On the camera side, decide which of the 2 possible holes you are going to use to connect theflex conduit. There is one hole on the side, and one on the bottom. Whichever you pick,remember to seal off the other one with the metal patch (included in the camera set).Scenario 1 – using the side hole. Scenario 2 – using the bottom hole.