ACS A1040 MIRA Operation Manual

Also see for A1040 MIRA: Operation manual Operation manual

ACS A1040 MIRA Operation Manual Manual pdf 34 page image

А1040 MIRA Low-Frequency Ultrasonic TomographOperation Manual34ACOUSTICCONTROLSYSTEMSFunctions of icons in the SETTING mode when editing the name are shown in the Table 10.Key Icon DescriptionAdjustment of parametersSelect gain and check the working capacity of the antenna arraySystem options of the deviceAbsence of the B Scans saved / Review of B-Scans parameters savedin memory of the deviceView the existing and create new MAPS1.4.2 REVIEW modeThe mode is used for on-line viewing of the internal structure of the tested object in any place. When of B-scans appear, itis possible to estimate the correctness of device options.The mode should be used before the consecutive data collection in the CARD mode.The mode includes the following operations: after the installation of the device in a determined place of the tested objectthe B-scan image will be generated and displayed. To check the device options, please install the device in those places wherethe internal structure of tested object is known, and it is possible to check the correctness of the constructed section. The stepscan be repeated infinitely.1