Menu
ACR Electronics NAUTICAST inland AIS Installation Manual
Also see for NAUTICAST 2662: User manualInstallation manualManualManualManual
                                                                                                    | |
Contents
| 
4.2 Entering the MMSI / IMO / DAC / ESN NumbersSelect from the Main Menu “Service Configuration” Number 6. This option requires theSERVICE password. The default password from the factory is mentioned on your AIS displayat the protection foil. Please see the appendix in your User Manual for additional passwordinformation. Enter Service Password and use the up and down arrows on keypad to select“Change MMSI / IMO” than press M5 “Select” or “by pressing number 3 on the keypad.Input your MMSI and IMO number and press Save to store data. Unit will reboot itself afterpressing Save. Continue to 4.2 after reboot.Service Configuration Menu Example:Note: MMSI and IMO Data input are limited to 9 characters.N 1o19' E 0o13' |1>0.01|2>1.30|3>1.80nm|----------------------------------| Menu-----| || +- 1. MessagesView | +- 2. AIS Status| +- 3. Voyage Settings-----| +- 4. Ship Settings| +- 5. Transponder ConfigurationMsg. | +- 6. Service Configuration| +- 7. Display Settings-----| +- 8. Graphical Display Settings|Displ|----------------------------------------NUM|Select->| | |<-BackN 1o21' E 0o14' |1>0.01|2>1.30|3>1.80nm|----------------------------------| 6. Service Configuration-----| || +- 1. Change Service PasswordView | +- 2. User Password Settings| +- 3. Change MMSI / IMO-----| +- 4. Change DAC / ESN| +- 5. Change AIS ModeMsg. | +- 6. Restore Factory Settings|-----||Displ|----------------------------------------NUM| Select->| | |<-BackY1-03-0212H35 |
Related manuals for ACR Electronics NAUTICAST 2662
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved