ACO FAM-PRO NP Series Operating Instructions Manual

ACO FAM-PRO NP Series Operating Instructions Manual Manual pdf 1 page image

OPERATING INSTRUCTIONS FOR THE FAMILIO PRO DIGITAL PANELFAM-PRO-xNP-xx-x (ACC, ZS)GENERAL INFORMATIONThe Familio Pro digital video interphone system is designed to be used for single-family and multi-family solutions, where transmission of a video signalaccompanied by an audio signal is required. The system also allows one toestablish internal connections (intercom) between monitors. The system topology isbased on Ethernet twisted pair cable, category 5e. The dedicated, energy-savingswitched-mode power supply unit is equipped with an integrated video splitter:1 input for the exchange unit and 3 monitor outputs.The panel has got up to 3 independent call buttons. However, it can supporta higher number of monitors assigned to the same button (address). It is alsocapable of reading proximity keycards and access badges, which allows the doorsto be easily opened directly from the panel. In the versions with a coded lock, doorscan additionally be opened by means of individual four digit codes. The housingis made of stainless steel, which ensures effective protection against devastationand the impact of atmospheric factors. It is easy to operate, functional and easyto install. The integrated camera is equipped with infrared LEDs (emitting lightinvisible to the eye), which allows users to get a video image after dark, withoutdazzling the interlocutor. The camera heating-up system ensures good visibilityin any atmospheric conditions and prevents the lens from getting misted overand it allows the system to operate in low temperatures.TECHNICAL PARAMETERS Power-supply voltage 15VDC ±5% Power consumption in stand-by mode ~2.5W Current consumption during video conversation 200mA Power-supply voltage of electric strike 12VDC – 15VDC Admissible loading of the electric strike output 1A Output type regular or reverse (factory default: regular) Lock activity time: 0.6 to 15s (factory default: 4s) Output control type: pulse to electric strike (factory default) orconstant control signal to the relay Number of supported users up to 3 Camera's angle of view about 75º Angle of vertical and horizontal camera adjustment 20° Connector type RJ45 socket / ARK-type screwed terminalconnectors Front panel material Stainless steel Type of the input contact for external opening Normally open (NO) Resistance of the INPUT contact for external opening ≤ 20Ω INPUT contact action delay 0 - 25s (factory default: 0s) Room required for surface mounting of the panel 265 x 70 mm (H x W, max. panel thickness: 45mm) Dimensions of the opening for flush-mounted box 269 x 73 x 32mm (H x W x D) Room required for flush mounting of the panel 286 x 90 mm (H x W) Communication with a PC USB (CDN-USB and the Familio PROapplication) Maximum number of different opening codes 4 (1 for every user + 1 administrator's code) Maximum number of supported proximity keycards 40 (10 for users + 10 administrator's cards) Standard of the supported proximity keycards (RFID) Unique 125 kHz62-002 Suchy Las, ul. Diamentowa 7, tel./fax +48 61 843 93 72www.aco.com.pl/en

/ 4

Related manuals for ACO FAM-PRO NP Series

ACO INS-ZS Assembly And Programming Manual

This manual is suitable for:

FAM-PRO NP Series

ACO FAM-PRO NP Series Operating Instructions Manual

Product

Learn More

Legal