ABL 16100 User Manual

Contents

ABL 16100 User Manual Manual pdf 52 page image

Real Time Triplex Stand Alone DVR526. Network SetupTo monitor and control videos remotely through network, you need to input the correct values.CHAP 3. SETUP MENU6.1 IP Address *000.000.000.000Set IP address of your DVR using arrow buttons. To move to other sub-menu, move cursor to position first,then press up or down button.6.2 Subnet Mask *255.255.255.000Set Subnet Mask of your DVR using arrow buttons. To move to other sub-menu, move cursor to positionfirst, then press up or down button.6.3 Gateway *000.000.000.000Set Gateway of your DVR using arrow buttons. To move to other sub-menu, move cursor to position first,then press up or down button.6.4 Type INTERNET / INTRANET- Internet : It is recommended in Internet connection. And its display speed is slower than “INTRANET”, butit guaranties no crashed video at any network traffic condition.- Intranet : It is recommended in Intranet connection. Its display speed is faster than “INTERNET”. But thevideo will be crashed, if the network condition is not fast enough.Set INTERNET/INTRANET using Left/right button.6.5 Sequence ON / OFF- ON : It is recommended in Internet connection. It sends each channels sequentially, so Client can receiveeach channels at same speed. But if network traffic is low, it will cause lower speed of transmission.- OFF : It is recommended in Intranet connection. Some channels will be updated slowly comparing others.6.6 Network ID ******** ( up to 8 letters)6.7 Password ******** ( up to 8 letters)You Must Register Your Network ID using Network Viewer first.Press Enter button and set Network ID & Password using direction button.To access DVR through Network Viewer program, you need to set same Network ID & Password to DVR.To return to main menu, press MENU button. (All setting is in effective after when you exit the menu.)

/ 84

This manual is suitable for:

16100

ABL 16100 User Manual

Product

Learn More

Legal