1. INTEDED USE AND SPECIFIC FEATURES OF CENTRAL HEATING COOKERThese cookers are intended for heating of premises via central heating utility as well as foodboiling and roasting, by solid fuel feeding (coal or dry wood). Besides that, it looks like a fireplaceowing to fire-resistant glass on the firebox door.The cooker may be connected to a utility witheither open or close pressure maintenance system, with water temperature up to 90°C and max.working pressure of 2.5 Bars.The cooker design allows easy fuel feeding and ahs cleaning. Reliable operation is enabled, highdegree of usability, as well as long life when following recommendations for accurate installationand exploitation, which we prove by a 5-year warranty.All connections on the cooker (inlet-outlet lines, smoke tube, heat exchanger connector, etc) arestandard, therefore not requiring any special adaptation during the connection.IMPORTANT WARNING: During the operation, the cooker door has to be closed, otherwisean uncontrolled temperature rise may occur exceeding an allowed limit, which may causedamages on the cooker and utilities. Besides that, an unjustified increased fuelconsumption may happen, as well.2. SAFETY2.1. SAFETY AND RELIABILITY IN COOKER OPERATIONThese central heating cookers are designed and fabricated to provide the highest operationsafety provided that the users comply with this MANUAL in all aspects.No responsibility is taken for injuries to humans, animals, or property damages as aconsequence of non-compliance with this manual.Any other use of the cooker is considered incorrect and thus either hazardous, too, suchas:Change of the cooker's intended use by solid fuel feeding but with no connection of hot waterŸline;Drying of coal, wood, fire starters, other objects and animals in the oven;ŸDrying above the hob of laundry, fuel and other flammable objects or objects which may fallŸonto the hob.2