ABB RMDE-01 Product Manual

Contents

ABB RMDE-01 Product Manual Manual pdf 21 page image

Installing the antennaWARNING!Parts of the antenna are an electrical conductor. Contact with power lines canresult in death or serious injury. The antenna installation location must not be closeto any power lines. If the antenna is elevated and at risk from lightning strike itmust be ensured that the antenna is mounted and earthed appropriately by atrained professional in accordance with the relevant standards.The antenna can be mounted inside the electrical room. It is also possible to install antennaoutside the electrical room if the cellular coverage is not appropriate.1. Select a suitable location to mount the antenna.• Make sure to maintain 200 mm space between the antenna and the metal objectsand surfaces. The minimum distance from the antenna to the user is 200 mm.2. Drill holes for the fastening the M4 screws of the antenna bracket.3. Fasten the antenna bracket.4. Mount the antenna to the bracket using the supplied nut and washer.5. Ground the antenna mounting bracket with 6 mm2 earthing conductor.Mechanical installation 21