ABB M2000 Reference Manual

Also see for M2004: Product manual System settings System settings Product manual Product manual

Contents

ABB M2000 Reference Manual Manual pdf 22 page image

1 Reference information1.7. Standard toolkit3HAC023297-001 Revision: A201.7. Standard toolkitGeneralAll service (repair, maintenance and installation) instructions contain lists of tools requiredto perform the specified activity. All special tools, i.e. all tools that are not consideredstandard as defined below, are listed in their instructions respectively.This way, the tools required are the sum of the Standard Toolkit and any tools listed in theinstruction.ContentsStandard tool, IRB 140: 3HAC020812-001 contains:Qty Art. no. Tool1 - Ring-open-end spanner 8-19mm1 - Socket head cap 2,5-17mm1 - Torx socket no:20-601 - Torque wrench 10-100Nm1 - Small screwdriver1 - Ratchet head for torque wrench 1/21 - Socket head cap no:5, socket 1/2"" bit L 20mm1 - Socket head cap no:6, socket 1/2"" bit L 20mm1 - Socket head cap no:8, socket 1/2"" bit L 20mm1 - Small cutting plier