ABB Infinity S Quick Start Manual

Also see for Infinity S: Quick start guide Quick start guide Quick start guide

ABB Infinity S Quick Start Manual Manual pdf 1 page image

Page 1© 2021 ABB. All rights reserved.QUICK START GUIDEInfinity S (NE-S) –48V/+24V Aluminum BusSystem• Socket - 5/16,” 7/16” and 1/2”, and 9/16”• Wire cutters and strippers• Cable crimpers• Torque wrench (0-240 in-lb / 28 Nm)• Screw Drivers - ( Flat # 1 & # 2 Phillips )Step 1 - Mount the SystemMount the system with a minimum gap of 3 inches behind the system to allow proper airflow.1. Remove non-conductive coating from mounting rails of frame and apply antioxidant If separate chassis ground is notprovided2. Attach the system to the frame using a minimum of twelve (six on each side) 12-24 screws (provided).Torque to 35 in-lb (7.3 Nm) - 5/16” socket.NES4824-23-AC5H-PS12-DC52A_M-LVBD-LVLDPrimary /SecondaryVoltageAC inputAC5H = TerminalStrip per Rectifier# of PowerSlots# of DistributionPositionsLVBD LVLDoptions23”wideModbus RTUInterfaceRead and follow all safety statements and precautions in this guide.Tools required:Jl 111111111,1,