ABB CP-ASI/2.8 Manual

ABB CP-ASI/2.8 Manual Manual pdf 1 page image

2CDC271002S0012Data sheetPower Supply CP-ASI/2.8Primary switch mode power supply for AS-interfaceThe CP-ASI power supply range is specificallydesigned with integrated data decoupling for thesupply of AS-Interface systems.Up to 62 slaves (binary I/O devices) can besupplied with a single two-conductor cable.The configurable IR addressing mode allows theeasy assign of new ID addresses by means of anexternal infrared programming unit.Characteristics– Rated output voltage 30.5 V DC– Rated output current 2.8 A– Rated output power 85 W– Rated input voltage 115 or 230 V AC, configurable– Infrared addressing mode– High efficiency of up to 90.5 %– Low power dissipation and low heating– Free convection cooling (no forced cooling withventilators)– Ambient temperature range during operation -10…70 °C– Open-circuit, overload and short-circuit stable– Integrated input fuse– Tool-free mounting on DIN rail as well as demounting– LEDs for the indication of operational statesApprovalsA UL 508, CAN/CSA C22.2 No.107.11)H UL 60950-1, CAN/CSA C22.2 No. 60950-11)1) Approvals refer to rated input voltage UinMarksa CEOrder dataType Input voltage range Rated output voltage Rated output current Order codeCP-ASI/2.8 85-132 V AC184-264 V AC30.5 V DC 2.8 A 1SVR427090R0280Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com