ABB C505 User Manual

Contents

ABB C505 User Manual Manual pdf 81 page image

774.10 Level E – CalibrationNote. This page enables fine tuning of the inputs to eliminate system errors.E.00...E.04Level E – CalibrationNote. To select this frame from anywhere in this page, press thekey for a few seconds.Analog Input 1 Offset CalibrationAnalog Input 1 Value in Engineering UnitsOffset [in engineering Units]If the and keys are not operated for three seconds the displayreverts to the offset value only.Analog Input 1 Span CalibrationAnalog Input 1 Value in Engineering UnitsSpan Adjustment[0.750 to 1.250]If the and keys are not operated for three seconds the displayreverts to the span value only.Analog Input 2 Offset CalibrationAnalog Input 2 Value in Engineering UnitsOffset [In engineering Units]If the and keys are not operated for three seconds the displayreverts to the offset value only.Analog Input 2 Span CalibrationAnalog Input 2 Value in Engineering UnitsSpan Adjustment[0.750 to 1.250]If the and keys are not operated for three seconds the displayreverts to the offset value only.Continued…4 CONFIGURATION MODE…CALLEVEE.000.0OFF.2E.030.0SPn.1E.020.0OFF.1E.011.0SPn.2E.040.0100.30.0100.30.0100.30.0100.3