Installation checklist 898Installation checklistWhat this chapter containsThis chapter contains a list for checking the mechanical and electrical installation of thedrive.Go through the checklists below together with another person. Follow the Safetyinstructions on the first pages of this manual.Mechanical installation Cabinet constructionChecks for cabinet construction are listed below.1 Cabinet construction1.1 Frame, wall, floor and roof structures, busbar enclosures and cable entries are correct and completelyassembled.1.2 The drive module is fastened properly to the cabinet. (See Planning the cabinet installation andMechanical installation.)1.3 Mechanical joints are tightened and not broken.1.4 Parts are clean and painted surfaces not scratched.The cabinet frame and parts which are in metal to metal contact with the frame (for example seams,component fixing points on assembly plates, back of control unit mounting plate) are not finished withnon-conducting paint or material.1.5 Degree of protection (IPxx)1.6 There is a sufficient number of supports, bolts and nuts for cables.
